Manual Wood Edge Trimming and Chamfering Tool
DETAILS
Give wood and edge-banding corners a cleaner finish without setting up a powered router for every small job. This compact manual edge-finishing tool helps trim light excess material and soften sharp edges, with four interchangeable radius blades for different finishing tasks.
- Clean up small edges: Remove light burrs and small amounts of excess edge material during fitting, installation and finishing work.
- Four radius options included: R1, R1.5, R2 and R2.5 blade profiles offer different edge finishes. Choose the profile suited to your material and project.
- Push or pull operation: Reorient the blade to suit your cutting direction, then make controlled passes along the edge.
- Choose your model: Select the Standard solid-body version or the Pro version with integrated guide bearings for rolling contact with the workpiece.
- Compact manual design: Keep a dedicated edge-finishing tool close at hand for small adjustments, without a motor or power connection.
Choose Your Model
- Standard: Solid-body design with the complete four-radius blade kit.
- Pro: Integrated guide bearings with the same complete four-radius blade kit.
What's Included in Each Kit
- 1 edge-finishing tool in your selected model: Standard or Pro.
- 1 R1 blade, pre-installed.
- 3 additional blades: R1.5, R2 and R2.5.
- 1 Allen key for blade changes.
Each kit contains one tool and four blades in total. Standard and Pro tools are sold separately.
Good For: Cabinetmakers, carpenters and DIY woodworkers handling cabinetry, shelving, furniture panels and edge-banding finishing.
Before Use: Match the blade to the material and test on an offcut first. Use light, controlled passes for finishing rather than heavy material removal.
SIZE GUIDE
Use these size guides as a reference. Fit can vary by brand and product type, so always check the product page notes when available.
Apparel Size Guide (CM)
Measure your body in cm and compare with the charts below. If you’re between sizes, choose the larger size for a more relaxed fit.
Tip: Keep the tape snug, not tight. Measure over light clothing.
How to Measure (Body)
- Chest: Measure around the fullest part of your chest.
- Waist: Measure around the narrowest point of your waist.
- Hips: Measure around the fullest part of your hips.
- Inseam: Measure from the crotch to the ankle (for pants/tights).
Men’s Apparel (CM)
| Size | Chest (cm) | Waist (cm) | Hips (cm) |
|---|---|---|---|
| S | 86–94 | 74–82 | 86–94 |
| M | 94–102 | 82–90 | 94–102 |
| L | 102–110 | 90–98 | 102–110 |
| XL | 110–118 | 98–106 | 110–118 |
| XXL | 118–126 | 106–114 | 118–126 |
Women’s Apparel (CM)
| Size | Bust (cm) | Waist (cm) | Hips (cm) |
|---|---|---|---|
| S | 80–88 | 62–70 | 86–94 |
| M | 88–96 | 70–78 | 94–102 |
| L | 96–104 | 78–86 | 102–110 |
| XL | 104–112 | 86–94 | 110–118 |
| XXL | 112–120 | 94–102 | 118–126 |
Note: Apparel sizing can vary by brand and fit (compression vs relaxed). If a product page lists measurements, follow those first.
Footwear Size Guide
For the best fit, measure your foot length (cm) and use the chart below. If you're between sizes, we recommend sizing up.
How to Measure Your Foot
- Use a sheet of paper: Place it against a wall on a hard floor.
- Stand and mark: Heel lightly against the wall, mark your longest toe.
- Measure heel to toe: Measure the distance in cm.
- Measure both feet: Use the longer measurement.
- Wear your usual socks: If you’ll wear sports socks, measure with them on.
Footwear Conversion Chart (CM → EU / UK / US)
This chart is a general guide. If a product page includes a specific brand chart, follow that first.
| Foot length (cm) | EU | AU/UK (Men) | US (Men) | US (Women) |
|---|---|---|---|---|
| 22.0 | 36 | 3.5 | 4 | 5 |
| 22.5 | 36.5 | 4 | 4.5 | 5.5 |
| 23.0 | 37 | 4.5 | 5 | 6 |
| 23.5 | 37.5 | 5 | 5.5 | 6.5 |
| 24.0 | 38 | 5.5 | 6 | 7 |
| 24.5 | 38.5 | 6 | 6.5 | 7.5 |
| 25.0 | 39 | 6.5 | 7 | 8 |
| 25.5 | 39.5 | 7 | 7.5 | 8.5 |
| 26.0 | 40 | 7.5 | 8 | 9 |
| 26.5 | 40.5 | 8 | 8.5 | 9.5 |
| 27.0 | 41 | 8.5 | 9 | 10 |
| 27.5 | 41.5 | 9 | 9.5 | 10.5 |
| 28.0 | 42 | 9.5 | 10 | 11 |
| 28.5 | 42.5 | 10 | 10.5 | 11.5 |
| 29.0 | 43 | 10.5 | 11 | 12 |
Tip: If you wear thicker socks or prefer extra room, size up. For sandals, keep heel and toes within the sole (no overhang).
Need Help?
If you'd like help choosing a size, email us at support@twinathletic.com.
SHIPPING & RETURNS
We ship to the United States with an estimated delivery time of 3–7 business days, handled through FedEx ICP for secure and reliable service. Orders are processed Monday to Friday, and you’ll receive a tracking link via email once your order is on the way.
Free shipping is available on all orders. For full details, visit our Shipping & Delivery page.
If your order isn’t the perfect fit, we offer 30-day returns. Items must be unworn, unwashed, and in original condition to qualify. For full details, visit our Return Policy.
GEAR WORTH ADDING
WORK GEAR. DONE RIGHT.
Modern gear built around what matters on the job: comfort, function and value. Made for the workday, without the old-school bulk.
OUR MOST-WANTED
COLLECTIONS BUILT FOR BETTER DAYS ON THE JOB.
Work Footwear
Work Lights
Tool Storage & Carry
Workday Comfort
FREE SHIPPING
Complimentary shipping on all orders.
CUSTOMER SUPPORT
Questions? Our team is available Monday to Friday, 9 am to 5 pm.
SECURE PAYMENTS
Pay securely with credit card, PayPal, Apple Pay, and Google Pay.
HASSLE-FREE RETURNS
Not completely satisfied? Return your order within 30 days for a full refund.